How to Connect Hikvision DVR to WiFi:

To connect your Hikvision DVR to WiFi, follow these steps. First, you must know the IP address of your Router. You can also configure port forwarding on your Router.

Once everything is configured, you can reboot your router. Now you can view your recordings with your mobile device.

Router IP address How to connect Hikvision DVR to WiFi:

In order to configure a Hikvision DVR to connect to the Internet, you’ll need to set the IP address of your router.

You can use any name for the domain, but you must make sure that the server is open and responds to you. You can use the Canyouseeme website to check if the IP address is working.

If you’re connected to the Internet by way of a WiFi connection, then you can set up your Hikvision DVR to receive remote access using the Internet. To do this, first, connect your Hikvision DVR to your router.

The IP address will be displayed on the router’s network settings page. After that, make sure to click the DHCP server and set it to 8000. Once you’ve completed this step, you can connect the Hikvision DVR to the Internet and view its live images from anywhere.

If you’re connected to the Internet by cable, you need to know the router IP address for Hikvision cameras. The IP address will be different for each router.

The most common is 192.168.1.1. If your connection is slower than that, you might need to try a different IP address for your security DVR.

After logging in, you’ll need to set a new password for the administrator account. Hikvision will check the strength of the password before allowing it, so be careful with the password you choose. If the password is too “risky”, you’ll be prevented from activating the device.

Configuration of port forwarding:

If you want to connect your Hikvision DVR to WiFi, the first step is to configure port forwarding. To do this, you can navigate to the Settings tab on your router and find the settings for port forwarding.

You can select different ports, such as HTTP, RTSP, and server. For example, you can set port 80 to be forwarded to your Hikvision DVR.

The next step is to check the status of the port. If it is closed, it means that the port has been blocked. This may happen if you have not set up the rules properly, or if the IP address of the device is incorrect.

If the port is open, it means that the device can talk to the internet. If the port is blocked, you can call your ISP and have them open it again.

Before you can configure port forwarding, you need to know the IP addresses of the network devices in your home.

Also, You must know the gateway IP address and the IP address of the DVR. You also need to know the external IP address, which is the internet connection provided by your ISP.

You should also set the device’s DNS address. This address is the one that will be used when you connect to the DVR from another location. Changing this value may prevent your DVR from connecting to your home network.

Rebooting How to connect Hikvision DVR to WiFi:

If your Hikvision DVR keeps restarting after powering on, the problem could be due to a conflict between its hard disk drive and the power adapter. To resolve this issue, try restoring the DVR to its default settings.

The product manual will tell you how to do this. Note that restoring default settings does not delete the video that has already been recorded. If the issue persists, you can always try to update the firmware.

Some HIKVision NVRs can be configured to reboot on a scheduled basis, and other NVRs may have a heartbeat monitor. Rebooting your NVR can reset its UPNP rules. You can also try changing the port numbers to see if this resolves the problem.

Rebooting your Hikvision DVR is not a difficult process, and there are some simple steps to follow. First, you must make sure that the power cable is connected properly to the DVR back panel.

Once you’ve done this, you can connect the DVR to your monitor via an HDMI cable. You must also make sure that the HDMI cable is plugged into the proper HDMI port. Otherwise, you will not be able to view the video feed.

Another way to reboot a Hikvision DVR is to use the ControlByWeb app. This application lets you monitor and control your ControlByWeb devices. Its features include basic remote and automatic reboot, logging, email/text alerts, real-time temperature monitoring, and custom Task Builder.