How to Connect Soundscore Earbuds to iPhone?

How To Connect Soundscore Earbuds To iPhone? Sometimes, new accessories can be a little difficult to pair or link to your iPhone. Luckily, most of the time this can be resolved with some simple troubleshooting.

For example, if your earbuds are not connecting to your device, try moving them closer together or turn off the Bluetooth function on your device. Also, ensure your earbuds are fully charged.

1. Turn On Your Earbuds:

If you have a pair of Soundcore earbuds that you want to connect to your iPhone, you should first turn them on. You can do this by removing them from the charging case and then pressing the Bluetooth pairing button (which is usually located on one of the earbuds). The earbuds will then start to flash white and enter into pairing mode.

Once the earbuds are in pairing mode, they will automatically connect to any device that you have previously paired them with. You can see which devices they are paired with in your smartphone’s Bluetooth settings.

You can also enable Mono mode, which will allow you to use just one of the earbuds. To do this, simply take the earbuds out of their case and then press and hold the touchpad on one of them. The LEDs in the case will flash white to show that the earbuds are in Mono mode. This can be very useful for people who don’t like to listen to music or podcasts in stereo. It can also be useful for people who have trouble wearing two earbuds at once.

2. Press and Hold The Power Button For 5 Seconds:

The earbuds will automatically connect to the last Bluetooth device they were successfully linked with. If the earbuds don’t connect to a device after being removed from the charging case, you can manually enable pairing mode by pressing and holding the power button for five seconds. The LED indicator will flash white to indicate that the earbuds are in pairing mode.

Once the earbuds are connected to your device, they will remain in pairing mode until you manually disconnect them from Bluetooth. The earbuds can connect to two devices at once, so you can listen to music on your phone while attending a conference call on your tablet.

You can also try resetting the earbuds by pressing and holding the power button for 10 seconds. The earbuds will then reboot and be ready for pairing again. This process is quick and easy, and it can help fix many common issues with Soundcore earbuds. If you still can’t pair your earbuds, contact customer support for further troubleshooting. The support staff is always happy to help!

3. Open The Charging Case:

There is a bit of a learning curve to getting started with Soundcore earbuds, but the process is easy. First, you need to put the earbuds into pairing mode. This is done by pressing the multifunction button on one of the earbuds for three seconds until the LED. The indicator flashes white rapidly. Once the earbuds are in pairing mode. You can open the charging case and connect it to any device that supports Bluetooth.

If you’re using a Windows computer. Check that the earbuds and the charging case are properly connected to each other (the case should close. And the earbuds should be detected) and that the Bluetooth connection is turned on. You can also try restarting your PC and then connecting the earbuds to see if that helps.

Once you’ve connected the earbuds to your iPhone. They should automatically pair with each other whenever you take them out of the case. If you want to use them with another phone or tablet, you’ll need to repeat the pairing process. If the earbuds don’t appear in your list of Bluetooth devices. You can manually add them by searching for “Soundcore” and tapping on the earbuds once they appear.

4. Turn On Bluetooth On Your Device:

If you’re having trouble connecting to your Soundcore. It may be a good idea to turn off any other Bluetooth devices that are connected to your device. This can help prevent interference that can cause problems when pairing.

Once you’ve turned off any other Bluetooth devices, you can proceed to pair your earbuds with your device. This process will differ slightly depending on the type of device you’re using. In most cases, you will need to open the charging case and press the power button for 3 seconds until the LED indicators flash blue.

Once the LED lights on both earbuds begin flashing blue, you can turn on Bluetooth on your device and search for a new connection. After a few seconds, your earbuds should appear in the list of available devices and you’ll be prompted to select them. Once your earbuds are paired with your device, you can begin listening to music!

5. Select Your Earbuds:

If you have trouble connecting your earbuds to your device, there may be a number of reasons why. First, ensure that your earbuds are adequately charged. If they are not, then the earbuds will not be able to connect to your device. You can also manually enable pairing mode on your earbuds by pressing and holding the multifunction button for a specific number of seconds. Consult your earbuds’ user manual for specific instructions on how to do this.

If your earbuds are still not connecting to your device, try resetting them. To reset your earbuds, open the charging case and press and hold the pairing button for 10 seconds until the LED light on the case starts flashing.

Another possible problem is that your earbuds might not be in the range of your Bluetooth device. This could be a simple fix – simply move your Bluetooth device closer to the earbuds until the Bluetooth connection is established. Finally, it is important to make sure that your earbuds are properly paired with your iPhone. If you have followed all the steps above, then your earbuds should be automatically connected when you remove them from the charging case.