How to Connect Samsung Soundbar to Subwoofer:

Samsung recently released the HW-Q950A, a dedicated how to Connect Samsung Soundbar to Subwoofer. While this unit has a slightly smaller bass range than last year’s model, it’s still loud enough to cause seat trembling during action-packed movie scores. The new model also comes with Alexa support for voice control, so it’s perfect for music lovers.

Manually connecting a subwoofer to a soundbar:

Manually connecting a subwoofer to Samsung soundbar can be challenging. However, there are some things that you can do to ensure that the connection is successful. First, make sure that both devices are within range of each other.

Also, check the cables and check for physical damage. If they are in good condition, they should be able to connect to each other without any problems.

Next, connect the power cord of the subwoofer and the soundbar. The power cord should be plugged into the Power Supply In the port of the soundbar. This port is located at the back of the soundbar. This port has a steady blue LED light.

Lastly, you can try Bluetooth or auxiliary cables to connect the two devices. Although this method has its disadvantages, it does work. However, it can be difficult to connect the two devices without the help of the remote.

Using a remote to connect a subwoofer to a soundbar:

If you want to use a Samsung soundbar and a subwoofer at the same time, you’ll need a remote to do so. First, you’ll need to pair the two devices.

The subwoofer’s blue LED will light up and show a “paired” status if you’re successful. To do so, you’ll need to use the digital remote app. Hold the upward-facing button for about five seconds. After this, the ID set screen will appear on the soundbar.

When connecting the two, be sure to use a remote that is compatible with the Samsung soundbar. Then, make sure that the subwoofer is powered and has its standby light on.

If you don’t see the standby light, you may need to troubleshoot the problem. It may be a faulty power outlet or a tripped circuit. If this happens, you may need to contact a Samsung dealer.

The subwoofer has an ID Set button that is usually located behind the box. Hold down the button for five seconds, and the blue link LED will blink rapidly. This is the signal that the subwoofer is trying to connect with the soundbar.

After five seconds, the Standby indicator will turn off and the blue link LED will blink rapidly for 30 seconds. If you can’t see any light at all, the subwoofer is probably not connected properly. It may need a firmware update.

Using a Bluetooth connection to connect a subwoofer to a soundbar:

If your soundbar does not automatically connect to your subwoofer, you may need to connect it manually. First, make sure that both devices are in range.

You can check this by pressing the gear button on the remote control. If the subwoofer still does not connect, it is possible that the firmware of the soundbar needs to be updated.

After you have found the subwoofer’s ID SET button, press and hold the button for 5 seconds. After five seconds, the LED on the soundbar should turn blue and the subwoofer will enter link mode. After the link mode change, the soundbar will turn blue and will flash.

Next, you can plug in the subwoofer. It may take a few moments to connect the subwoofer to the soundbar. Make sure that the soundbar and the subwoofer are powered on. Then, press the recessed ID SET button on the subwoofer to connect the devices.

Troubleshooting connection problems:

If your Samsung Soundbar and Subwoofer are not connecting, try to reset them. This will restore factory settings and force the two to reconnect, clearing connectivity issues.

To perform this reset, turn off the Soundbar and Subwoofer, and press the power button for a few seconds. When ‘INIT OK’ appears on the screen, release the button. Then, restart the soundbar.

If the volume on your Samsung subwoofer drops, it may be due to a firmware problem. If this problem persists, try connecting the two manually.

If this doesn’t fix the problem, try restarting the system or checking the connections. If you are still experiencing issues with the subwoofer, you may need to perform a firmware update.

If you’ve tried both these methods and still have connectivity issues, you may need to restart your soundbar. This method is the easiest to perform and doesn’t lose any settings.

However, it is important to note that this method will remove all Bluetooth-paired devices and restore the device to the factory state.