Table of Contents
Why Do AirPods Keep Disconnecting From iPhone?
If your AirPods keep disconnecting from your iPhone, there may be several possible reasons. The first reason could be interference from separate Bluetooth devices.
When AirPods are too far away from your iPhone, they produce interference. Another cause could be Wi-Fi, which uses the same frequency spectrum as Bluetooth.
Disable automatic switching on AirPods keep disconnecting from iPhone:
If you want to use AirPods without having to constantly reconnect them to your iPhone, it might be useful to disable automatic switching.
This feature works on iOS and iPadOS and can help you stay connected to your music even if you’re not in the same room. However, there are a few ways to prevent the auto-switch from happening.
The first way to disable automatic switching is to make sure that you’re signed out of both devices.
After you switch your AirPods to a different device, you’ll notice a notification. This is the signal that your AirPods need to connect to the other device.
You can also turn off automatic switching by adjusting the settings on your AirPods. To do this, go to Settings > Bluetooth> Info.
Update firmware on AirPods keep disconnecting from iPhone:
If you’re getting disconnected from your iPhone while using your AirPods, you might need to update the firmware. This will help the AirPods reconnect to your iPhone without disconnecting during phone calls. Sometimes the problem is caused by Bluetooth interference, such as a device running on the same wavelength.
Other possible causes include system errors or an outdated iOS version. Updating your iOS version will prevent these problems.
First, check for updates on your iOS device. Some updates include bug fixes and will improve the connectivity between your iPhone and your AirPods.
Also, resetting your iPhone’s network settings might fix this issue. If that doesn’t work, try to reconnect your AirPods to your iPhone by placing them in their charging case for a few seconds.
Another possible cause is that the Apple software in your AirPods is unable to establish a stable communication connection. If this is the case, you might need to update the firmware on your iPhone and Mac.
Apple released software patches in iOS 12.1 that can fix this problem. Another possible cause is interference in the wireless audio system between your iPhone and AirPods. If you cannot find an update for your iPhone, check with Apple Support.
Check if AirPods are in your ears:
If your iPhone keeps disconnecting when you try to use AirPods, you might want to check if the device is in your ears. Normally, the AirPods automatically detect if they are in your ears, but you can turn this off if you want. You can do this in Settings.
If you’re experiencing issues with your AirPods, the most common solution is to remove them from your ears and re-plug them into the charging case. To do this, hold the charge case button for about 15 seconds.
The orange LED on the case should light up. If your AirPods still do not pair with your iPhone, try manually pairing them with Bluetooth.
You can also use a soft-bristled toothbrush or cotton buds to clean the openings on the AirPods. Make sure to avoid using too much pressure as it may damage the mesh or force wax into the speaker grills.
If the problem persists, you can also try to turn off the Automatic Ear Detection feature. You can do this in Settings – Bluetooth – or go to My Devices and tap on the AirPods.
If you’ve been having problems pairing your Apple AirPods with your iPhone, you may want to try a hard reset.
This will remove all existing connections and allow them to reconnect with your iPhone once they’re unplugged. Secondly, check that the AirPods’ battery is at least 75%.
If they are below that, try charging them again. To do this, open the case and hold it for about 20 seconds. The AirPods should turn yellow and work normally again.
Sometimes, this issue can be a result of Bluetooth interference or internal sensors. Powering off and on again can fix a lot of technical issues, including this one.
You can also try reconnecting your AirPods with your iPhone by placing them back into their charging case and letting them sit there for 15 seconds.
To make the process faster, move them close to your iPhone. You should also ensure that they are fully charged before trying this step.
Lastly, you can try resetting your AirPods’ network settings. This can solve the problem if your AirPods keep disconnecting from your iPhone randomly. Keep in mind that older versions of AirPods may have outdated firmware.
You should check the firmware of your AirPods with your iPhone. If you find that the problem is related to an older version, you should update them to the latest version.