How to Connect Computer to Printer Wirelessly:
If you’re wondering how to connect your computer to a wireless printer, there are a few different ways to go about it.
You can use Wi-Fi Direct, Wi-Fi Protected Setup (WPS), or even hard-wire the printer to your router. The key to successfully connecting a printer to a wireless network is different for each type of printer.
Wi-Fi Direct How to Connect Computer to Printer Wireless:
You can use Wi-Fi Direct to connect your computer to a printer wirelessly. This technology uses embedded software that acts as a wireless access point and also provides security features, such as Wi-Fi Protected Setup. It also makes it easier to share content with other devices, like a printer.
This technology creates a virtual network without a central hub. You can use it to print from your smartphone, stream content to your smart TV, control the thermostat, and share information via peer-to-peer networking.
It works by implementing Near Field Communications (NFC), which means that it can connect to other devices, even those not connected to Wi-Fi.
Wi-Fi Protected Setup (WPS) how to Connect Computer to Printer Wireless:
Wi-Fi Protected Setup ( WPS ) is a security standard used to make wireless connections. Its purpose is to make it easy for consumers to connect wireless devices to a home network. It is also a useful security feature for users who are concerned about security.
To use the WPS feature, make sure that the printer is in range of the wireless network. Then, press and hold the WPS button on the printer for five seconds. Within two minutes, press OK to confirm the connection.
Hard-wire printer to the router:
If you don’t have WiFi capabilities on your printer, it may be possible to hard-wire the printer to your router wirelessly.
There are also powerline Ethernet extenders available for this purpose, which enable you to connect your printer to your router from just about anywhere in your home.
The only drawback to this method is that you’ll probably need to configure the printer first. You can do this by using the printer’s software or screen or by logging into the printer over the network.
If you’re still having trouble connecting to your printer, try setting the printer to a static IP address. After that, plug the printer into an electrical outlet or power strip and wait about 60 seconds. If the printer doesn’t see your computer, check the router’s settings.
To connect a printer wirelessly, you must install the correct drivers for both the printer and the computer.
These drivers must be compatible with your computer’s wireless adapter and operating system, as well as any static IP address your computer may have. You can also install a printer manually by following the steps below.
First, make sure the printer has a control panel or is wireless capable. You can access this via the Network menu or the Wireless icon on the control panel.
Once you do, you will be prompted to choose a WiFi network. Be sure to type in the name of the network in its full name, as case-sensitive networks may not be recognized by the printer.
Channel selection on routers:
To change the channel of your printer, first, change the settings on your router. Most routers require you to change the SSID name of the wireless network, so make sure you change this on all devices involved, including the printer.
After making the change, click on “Apply Changes” to finalize the channel setting. You can then send a test document to the printer wirelessly to check if it prints.
Wireless routers often use one, six, or 11 channels. Select a channel in the list of available channels to maximize your wireless range. When you change the channel on your router, your printer will automatically detect and use the new channel.
Resetting the printer’s network settings:
If you’ve ever experienced problems with a wireless connection on a printer, you may want to try resetting your printer’s network settings.
This will remove any connections between computers on the network, and you will need to reinstall the printer’s software on each computer. To do this, go to the printer’s settings page and click Reset Network Settings. Click Yes, and then press OK to confirm.
The Ready LED on your printer should turn on to indicate that the connection was successful. If the LED doesn’t turn on, the connection failed.
In that case, you should try again, starting from the beginning by restarting your printer and the router.