Table of Contents
How to Connect Soundcore Liberty Earbuds?
How To Connect Soundcore Liberty Earbuds? If you haven’t done so already, start by ensuring that the earbuds are fully charged. Open the charging case, and they will automatically enter pairing mode.
When the earbuds are in pairing mode, they will show up on your Bluetooth device’s list of available devices. Select them and complete the pairing process.
How to pair?
Getting the Soundcore Liberty Earbuds into pairing mode is easy and similar to that of Apple AirPods. All you have to do is open the case and wait for about three seconds. The LED indicators will start flashing white rapidly, indicating that they are in pairing mode.
After that, press the multifunction button on one of the earbuds for two seconds. The earbud will be automatically connected to the other, and the LED indicator on that earbud will switch to a slow white light. The earbuds can also be controlled using the Soundcore app.
You can use the app to perform various tasks on your earbuds, such as checking the battery status and firmware updates. You can also customize the audio settings and create presets. You can download the Soundcore app for free from the Play Store or from the Anker website.
If you have issues pairing your earbuds, first clear all pairing history on your device. To do this, place the earbuds into the charging case and leave the case open. Button on the charging case for 10 seconds until the LED indicators flash red three times. The earbuds reset and for pairing again. The earbuds are now ready to pair with any device that supports Bluetooth. Once paired, the earbuds will show up on your device’s list of available devices and you can select them to listen to music or make calls.
When you’re not using your earbuds, place them back into the charging case. Press and hold the button on the case for 10 seconds until the LED indicators rapidly flash white 3 times.
If you’ve had one earbud stop working, it might be a sign of a malfunctioning wire. To solve this issue, check the earbud’s wire for a shorted or broken connector. If this is the case, you’ll need to replace the earbud’s cable. You can do this by purchasing a replacement cable or buying a DIY kit that includes the necessary tools and materials.
Before you replace the earbuds‘ cable, make sure you’ve completely deleted the pair from your device’s Bluetooth list. To do this, open your device’s Bluetooth settings and select the earbuds from the list. Once the earbuds are connected to your device, you can begin listening to music and using the voice assistant.
To reset the earbuds, first turn them off. Then, open the charging case and power them on. After a few seconds, the earbuds will automatically power on and enter pairing mode. Once they are in pairing mode, the LED indicator on the left earbud will flash slowly and the right earbud will flash quickly.
If you’re having issues. This will delete all pairing information and allow the earbuds to pair with a new device. To factory reset your earbuds, first remove them from the charging case and press and hold the multifunction button on both earbuds for 8 seconds. The LED indicator will flash rapidly and slowly. Once the earbuds have you can start using them again.
You can also manually power off the earbuds by pressing and holding the touchpad on one of them for eight seconds. Once you’ve done this, the LED will flash red to indicate that they’re off. Once you’re ready to turn them back on, simply press the touchpad again for two seconds.
If you’re having trouble with your earbuds, try restarting them before you give up on them. Usually, this will solve the problem. If you’re having more serious problems, it’s best to consult a technician or contact Anker’s customer support team. They will be happy to help you resolve your issue. Depending on the problem, they may recommend a different solution or even send you replacement earbuds. You can find support articles and phone numbers for several countries on Anker’s website. Also, you can use the Soundcore app to find assistance with your earbuds.
If you are having trouble with your Soundcore Liberty Earbuds, there are a few things that you can try. First. Make sure that the earbuds. Next, make sure that the earbuds have the latest firmware. Finally, you can also try factory resetting the earbuds. This will reset both the right and left earbuds to their original default settings. To do this, put the earbuds back into the charging case and keep the lid open. Press and hold the button on the charging case for 10 seconds, or until the LED indicators flash white rapidly three times.
Once the earbuds are reset. If you are still having trouble, you can contact the Anker support team for assistance.
If one earbud is not working, you may have a problem with the wear-detection feature. To fix this, you can turn off the wear detection in your Soundcore app or by using the touchpad on the earbuds. You can also try resetting the earbuds or updating their firmware. You can find these options in the settings of your Soundcore app. If you are having problems with the earbuds, it is important to know how to troubleshoot them properly so that you can enjoy your music without any interruptions.