Is My iMac Keyboard Not Connecting on Startup?

If your iMac keyboard is not connecting on startup, you can use a few different tricks to fix the problem.

You can try resetting the SMC, unplugging connected devices, and even resetting the system management controller. If none of these methods work, you can try setting up a Bluetooth keyboard.

Fixing the iMac keyboard not connecting on startup:

The problem you’re experiencing could be due to a malfunctioning USB port. Unplug your USB keyboard from your Mac and replug it into another USB port.

If that doesn’t fix the problem, you should replace it with a new one. The problem can also be due to outdated firmware or operating systems.

If you’re using a third-party USB keyboard or mouse, you may have to remove the USB receiver from the device.

Once you’ve done that, plug in the keyboard or mouse into a different USB port on your iMac. You may also need to use a USB hub or adapter.

Another possible cause for this issue is external interference, such as another computer. If the problem persists, you might want to try shifting the desktop device or troubleshooting in Safe Mode. A faulty mouse or keyboard could also be the culprit.

Resetting the SMC iMac keyboard not connecting on the startup:

If you’re having problems connecting your keyboard to your iMac, there are several options you can try. One option is to reset the SMC on your Mac.

If this process doesn’t work, you may have to wait a little longer for your computer to start up. Resetting the SMC on your Mac will take a little longer than it does on other computers, so be patient!

First, disconnect your iMac and power adaptor. You can do this by holding down the power button for a few seconds. Once you hear the chime, release the keys.

This process resets the SMC (Storage Management Controller). Once the SMC is reset, you must wait at least 15 seconds before powering on your iMac. If the issue persists, you can also try to install any pending updates.

Depending on the type of Mac and its battery type, you might need to restart your computer in order to fix the issue. This may take a few minutes, but it will fix the problem.

Removing USB keyboard pairing from the old machine:

If you have a Bluetooth keyboard, you may want to consider removing it from your old machine. Sadly, this can cause a lot of trouble, especially if you’re working in a big office.

It’s not uncommon for IT to forget to remove the Bluetooth pairing, which can cause quite a bit of conflict with other co-workers. To fix this problem, follow these steps:

You may need to reset your Mac’s SMC (System Management Control) and PRAM if you’re using an Intel Mac.

On an Apple Silicon Mac, you don’t need to perform this step. This is because Bluetooth may be prioritizing a Bluetooth keyboard over the USB keyboard.

If your new keyboard doesn’t appear under the USB devices in Device Manager, you may have to switch to a PS/2 port. Once you’ve done this, you should be able to reconnect your new keyboard.

If the previous keyboard’s software is conflicting with the new one, you should uninstall it in Windows Device Manager. Then, reconnect your new keyboard to a different USB port on your old machine.

Setting up Bluetooth keyboard:

Before you can set up a Bluetooth keyboard on your iMac, you’ll need to pair it with your Mac. If your Bluetooth keyboard doesn’t work, check that the indicator light is blinking. If it’s not, the keyboard might be paired with another computer or the battery is low.

You can try reconnecting it by turning it off and on again. Once the device pairs, you can connect your Bluetooth keyboard to your Mac by going to System Preferences.

Set up a Bluetooth keyboard on your iMac by following these steps. First, make sure that your Apple wireless keyboard has a battery. It’s important to make sure that your keyboard’s batteries are fully charged and turned on.

To connect it to your Mac, click on the Apple logo and then choose System Preferences. Then, follow the onscreen instructions. Wait for a moment, and your keyboard should pair automatically with your Mac.

If you’ve paired your keyboard with your Apple wireless mouse, you need to turn off the other device first. This prevents conflicts between two paired devices.

After pairing, your keyboard will enter discoverable mode. Once it detects other paired devices, it will automatically connect to the first one in range.