Table of Contents
How to Fix AirPods That Won’t Connect to iPhone?
AirPods Won’t Connect To iPhone? Apple’s automatic pairing system can run into bugs sometimes. Fortunately, you can bypass these problems by manually pairing your AirPods with your iPhone or iPad.
First, check if you have the latest version of iOS on your iPhone. If not, install the update. After that, try connecting your AirPods again.
Check the Battery:
It’s possible your AirPods are simply running low on power. Try them again with a fresh charge, and see if you’re able to connect to your iPhone.
Alternatively, you could also try resetting your AirPods. To do this, remove them from your iPhone, close the case lid and hold the setup button on the back of the case for about 30 seconds, or until the status light flashes white. Then, follow the on-screen instructions on your iPhone to pair them again.
Another thing you can try is resetting your Mac’s network settings. This will reset any bugs that are affecting your wireless connections, including your AirPods’ connection to your iPhone or iPad. You can do this by opening the Apple menu and selecting System Preferences.
You can also check your AirPods’ battery life by putting them in their charging case and then opening the case lid. Then, look for a green light that indicates the earbuds are fully charged. If the case has an amber light, it means that the earbuds are not fully charged.
There are many other things that can cause a problem with pairing your AirPods to an iPhone, including having dust or earwax on the speaker grills of your earbuds and their case. If you notice that a lot of dirt and debris has been collected on them, use a clean, soft-bristled brush to remove it. You can also contact Apple Support to have the case cleaned professionally.
Check the Connection:
AirPods are built to connect seamlessly with an iPhone or iPad, but this doesn’t always work as intended. You might get a ‘Connection Failed’ error when you try to pair them to your device, and there are a few easy troubleshooting steps that you can take to fix this issue without implementing any advanced tweaks.
The most common reason for this error is that the AirPods are too far away from your device. The earbuds have a maximum Bluetooth range, and once that limit is reached, they will stop trying to connect to the phone. To fix this, move your earbuds closer to the iPhone and try pairing them again.
Another potential cause of this error is a problem with the Bluetooth connection on your phone. If you have a few apps on your phone that use Bluetooth, they might interfere with each other and prevent the AirPods from connecting to your phone. To resolve this, go to Settings > Bluetooth and disable all of the apps that you don’t need anymore.
It’s also possible that your iOS device is running an outdated version of the firmware. Apple regularly releases updates for its operating system, and some of these versions include bug fixes that fix connectivity problems like the one you’re experiencing. To check if your phone has an update available, tap the Settings app on your iPhone and select “General.” Then, choose Software Update.
Check the Case:
If your AirPods aren’t connecting, it could be because they’re out of range. AirPods pair over Bluetooth, which only works if both devices are within proximity to each other. To check, open your iPhone’s Control Center and look for the audio output icon, which resembles a triangle with circles coming out of it. If your AirPods or charging case aren’t listed here, they’re out of range.
Another possibility is that your iPhone or iPad has a hardware problem. You can try a few things to fix this. First, try pairing your AirPods with a different Apple device—another iPhone, iPad, Mac, or Apple Watch. If the problem persists, it might be time for a factory reset.
The last possible reason for your AirPods not to connect is a software issue. This can happen for a variety of reasons, including an automatic pairing system bug, or a software update that corrupted your network settings.
To solve this problem, go to Settings > General > Reset > Reset Network Settings. This will reset your wireless and Bluetooth connections to their default states, removing any bugs that might be preventing them from working correctly. If this fixes your problem, you can start using your AirPods again. If not, you can always contact Apple support for further assistance. You can do this through the Apple Support app or by visiting an Apple Store.
Check the Bluetooth Settings:
The iPhone might be connecting to another audio device, which prevents it from picking up the sound from your AirPods. You can check this by turning off your other Bluetooth devices or simply disconnecting them from the iPhone. This will also reset your AirPods’ pairing.
Many apps that use your phone’s Bluetooth permissions can interfere with the connection of AirPods and other Bluetooth devices. You can check the list of Bluetooth permissions on your phone, and disable or delete any apps that you no longer need. You can also turn off the auto-switching feature on your phone, which may help prevent this from occurring.
It is also a good idea to avoid equipment that can interfere with your Bluetooth signal, such as power cables, microwave ovens, fluorescent lights, cordless phones, and more. These devices can all affect the performance of your Bluetooth device.
Another possible solution is to update your iOS device. Apple regularly releases updates to fix bugs and other issues, and this can sometimes solve Bluetooth problems.
You can update your iOS by opening the Settings app and selecting “General”. Tap “Software Update”. If there is an update available, tap “Download and Install”. If you’re asked for a passcode, enter it, and then follow the on-screen instructions to complete the process. Once the update has been installed, try connecting your AirPods again to see if the problem is resolved.