How To Connect DJI Controller To WiFi

How To Connect DJI Controller To WiFi?

How To Connect DJI Controller To WiFi? You need to connect your RC to a WiFi signal when signing into your DJI account, loading the base map during mission planning, and synchronizing and importing airspace unlock certificates. To do this, you need to navigate to the RC’s WiFi settings.

First, ensure the RC is powered on and that there’s a good connection to your home Wi-Fi network. Then, open the DJI Fly App and swipe down from the top to get the Settings Window displayed.

1. Turn on the RC

There are a few different ways to connect your DJI drone to your smartphone. But one of the easiest is to use WiFi. This method allows you to connect the drone and controller without needing a data connection. Which can be very helpful in places where there isn’t a lot of cell service.

To begin, power on the drone and controller. Now, open the DJI Fly App on your smartphone. If you don’t already have an account, you can create one on the app’s built-in screen or log in with your existing account.

Once the DJI Fly app opens, choose the Flight Interface option. You’ll then see a list of available WiFi networks. Select the network you want to connect to and enter the password. Once the connection is complete, you’ll receive a confirmation message.

If the RC can’t connect to your WiFi network, you may need to reset the device. To do this, press and hold the Return button and the Function button on the RC for three seconds. Then, tap the Settings icon and select Reset. This will restore the default settings on your RC and reset the WiFi password. After doing this, try connecting to another WiFi signal to isolate the issue.


2. Open the DJI Fly App

DJI’s Fly app is the interface to all of the company’s current-model consumer drones. It’s how pilots see what the drone camera sees, change critical settings, and record content. Before you can get started using the app, however, it’s necessary to ensure both the drone and mobile device are powered on and connected to a WiFi network.

If you’re using a controller with a built-in screen (e.g., the RC 2 Remote Controller) that hasn’t yet been linked to a smartphone, follow the instructions on the screen to set up a connection between your phone and the aircraft. Once the connection is established, you’ll need to install the DJI Fly App on your smartphone if it isn’t already installed.

To do so, open the DJI Fly App on your mobile device and swipe down from the top of the screen to bring up a small panel of information related to the drone you’re using. From there, tap on the “setting” tab. Depending on the model of your drone, you may need to agree to the app’s location and photo access settings before proceeding. Once this is done, you’re ready to start flying!

3. Connect to a Wi-Fi network

A WiFi connection is required when logging in to the RC, loading the base map for mission planning, and synchronizing and importing airspace unlock certificates. If you are experiencing WiFi issues, you may need to connect your RC to a different network.

The simplest way to do this is to connect your phone to the same Wi-Fi network as the controller. Simply open your phone’s WIFI settings look for an SSID named Spark-RC-XXXXXX and enter the password 12341234 to establish a wireless connection between the controller and your phone.

This should work in most cases. If the problem persists, please contact Propeller Hardware Support for further troubleshooting.

4. Log in to the DJI Fly App

Once the drone is connected to Wi-Fi, you can use the DJI Fly App to control it. The app also provides a live video feed from the drone’s camera. This makes it easier to follow the drone as it flies and helps you to get better shots.

The DJI Fly App is available for download from the App Store or Google Play. The app is free to install and has a variety of features. You can find information about the drone’s location and battery status, and you can even see a live map of your flight locations. The app also includes a flight log, which allows you to keep track of all your flight data.

It is important to remember that the drone’s battery must be fully charged before flying. If the battery is low, it may not be able to establish a Wi-Fi connection. The DJI Fly App also offers some troubleshooting tips to help you resolve connectivity issues.

It is recommended that you update your firmware on both the drone and the mobile device to ensure compatibility and maximize performance. You can access the latest firmware updates by visiting the DJI website. Also, you should avoid flying in areas with many metal objects, as these can interfere with the signal. You should also make sure that the mobile device is in range of the drone and that it has a strong Wi-Fi signal.


The DJI RC controller is designed to connect to your home WiFi network. However, if you are using your mobile hotspot to connect to the internet on your smart device. It may interfere with the connection between your smart phone and the RC controller. To avoid this from happening, disconnect your mobile hotspot while you are flying. You can reconnect your mobile hotspot when you finish your flight.

Rasheed Alam

Add comment

Your Header Sidebar area is currently empty. Hurry up and add some widgets.