Most Bluetooth mouse devices pair with the receiver through a process known as “pairing.” Once the receiver and mouse are paired, they can communicate over a Bluetooth channel.
To pair a wireless mouse, first put it into pairing mode (check the instructions in the user manual). Then plug the mouse’s receiver into one of your computer’s USB ports.
Table of Contents
How to Pair:
Also, Most wireless mice communicate with the computer via Bluetooth. If your mouse uses a USB receiver, consult the documentation for that device for additional information on connecting.
Make sure that the mouse is powered on. Locate the power switch, usually on the bottom of the mouse, and slide it to the ON position.
If your mouse is equipped with a battery compartment, insert a fresh set of batteries. If the mouse includes a Channel button, follow the directions for pressing that to select your preferred Bluetooth communication channel before proceeding.
Open the computer’s Bluetooth software. Depending on your computer, this may be available in the Control Panel or as part of the operating system.
The mouse should appear in the list of available devices. If prompted for a passkey, select No passkey.
Also, Once the mouse is in pairing mode, your computer should automatically recognize it and offer to pair with it. If this doesn’t occur, consult the documentation for your mouse to determine whether it requires a particular pairing sequence.
Installation How to Connect Mouse Wireless Mouse:
The transmitter in a mouse sends an electromagnetic (radio) signal that encodes information about the movements and button clicks of the mouse.
The receiver, which is connected to your computer, accepts and decodes these signals. The mouse driver software on your system interprets them as commands and transmits them to the computer.
Most wireless mice use a USB receiver to connect to your PC. These small, rectangular devices are usually stored in a compartment on the bottom of the mouse.
They typically require a pair of batteries, which you can install by sliding open a panel on the bottom of the mouse or removing the battery cover.
To connect a mouse with a USB receiver, insert the receiver into one of your computer’s available USB ports.
Some laptops have dedicated USB ports, while most desktops have them in the front of their CPU boxes. If your mouse has a channel button, press it to select the desired Bluetooth channel before pressing the connect button on the mouse.
Testing How to Connect Mouse Wireless Mouse:
Mouse testing is a vital part of evaluating the quality of any wireless mouse. This process showcases click latency, which is the time it takes for a mouse button to register as clicked by the computer.
A good mouse has a low latency, which makes it easy to maneuver and control the cursor. It also has a high polling rate, which means that it communicates with the computer more frequently. This allows for a quicker response to button presses.
Also, To test your mouse, you can run a hardware diagnostics program, such as HP PC Hardware Diagnostics UEFI, or use a third-party tool.
Follow the instructions in the tool to run a comprehensive set of tests on the mouse, including the USB drivers and connection.
Also, check that the mouse’s power switch is on and that its USB receiver is plugged in. The mouse should connect to the computer and appear in the device window once it is fully synchronized.
The mouse sends an electromagnetic signal that encodes the clicks of its buttons to the receiver connected to your computer.
The receiver, which may be a separate device that plugs into one of your USB ports or a built-in component, decodes the signal and passes it to the computer’s mouse driver software.
A light on the receiver should start blinking or a notification should appear on your computer to indicate that the mouse is being recognized as a new device.
If you see the light on your mouse’s receiver flashing, try pressing the Connect button on the mouse again to re-enable Bluetooth pairing.
If the mouse is still unable to connect, try moving it to another surface and using a different USB port. Outdated drivers may also cause the problem.
To solve this issue, you can use a 3rd party program like Driver Easy to automatically update your mouse drivers. The program will scan your computer, identify the incorrect drivers and then automatically update them to the latest versions.