Why is My Ethernet Connected But No Internet? – How Do I Fix My Ethernet Connection?
There are many reasons for the error message “Ethernet Cable Connected But No Internet”. The first step to resolve the issue is to check whether your other devices are also connected to the internet.
Then, check your network settings to see if they are outdated. In some cases, the error message may be caused by faulty network drivers. The last thing to do is to reboot your system. After the reboot, the error should be resolved.
Ensure that you have connected your Ethernet cable to the WAN port on your router. It is important that the connector on your Ethernet cable is in good condition. If the connector is damaged, it is recommended to replace it.
Reasons that May Cause Problems:
There are many other reasons for a computer to not connect to an ethernet network. Usually, the problem is caused by hardware, but in some cases, it could also be a result of faulty network drivers.
Sometimes, the Ethernet cable may not be properly connected. Before you try to reconnect the cable, check that the PC is connected to the router. If the computer is plugged into the Ethernet port, it is connected to the router.
The connector should be connected securely, and there should be no visible damage to the cable. If the connector is damaged, you should replace the cable. So, if the cable is connected but your computer still doesn’t recognize the network, you may have an issue with network drivers or IP settings.
If you have an Ethernet cable connected but no internet, you need to check that it is not damaged and is connected properly to the router. Then, check the wires. If the wires are securely connected, the problem may be with the Ethernet connection.
Check your Network or IP Settings:
Alternatively, you may have to check your network settings or IP settings. If the problem persists, you may need to contact your provider and get a new cable for your PC.
Check the cable. Sometimes, the cable is damaged. You need to replace the cable. Then, check the hardware and software settings. Then, try to connect the device again.
If the problem persists, you should uninstall the faulty network drivers. These steps are not enough, you should consider the option of replacing the Ethernet cable. If it still does not work, you can try changing the network settings to make it work.
After connecting the ethernet cable, you need to check the settings. It should be listed as “Local Area Connection” or “Not connected.” Right-click the ethernet adapter and confirm the uninstall. If it does not work, try another e-mail server.
The internet connection should now work. If you’re able to connect to the other computer, you’re in luck!
Check for your Ethernet Cable:
It is possible that the cable is damaged. Try connecting the Ethernet cable directly to your modem. If this does not work, try removing the cable and restarting the computer. So, if both cables are still connected, the problem is likely with the network equipment.
If they are, it is time to replace the hardware. You should check all the other hardware in the same way. If it is still working, you should test your network equipment again.
If the cable is properly connected to the router, you can try unplugging and reconnecting the device. However, you must be careful to make sure the cable is secured and that it is inserted into the sockets properly.
Try a Different Network Cable:
It is a common problem, but if it is connected, you can use the internet. You can even try a different network cable. If the problem is not resolved, you can contact your ISP.
So, if the problem persists, try rebooting the system. If it still doesn’t work, try connecting it to another port. Also, if the Ethernet cable is working but the internet isn’t working, connect it to your router or replace the line.
When all else fails, try disconnecting the cable to a different location. When the connectivity is restored, wait for a few minutes and then reconnect it. If the problem persists, you can try any of the other solutions below.