How To Connect Skull Candy Headphones

How to Connect Skull Candy Headphones to Your Device?

How To Connect Skull Candy Headphones? To connect your Skull Candy Headphones to a device using Bluetooth, put the headphones into pairing mode. Typically, you can do this by pressing and holding the power button until an LED light starts flashing.

Make sure the earbuds are charged; low battery levels may interfere with the process. Check compatibility and reset the earbuds as needed.


Skull Candy headphones and earbuds are designed to be wireless, which means you can listen without wires. Connecting them is simple: open your device’s Bluetooth settings (on an iPhone. Tap ‘Settings’ and then ‘Bluetooth’; on Android phones, swipe down from the top of the screen and select ‘Bluetooth’). Find your headphones or earbuds in the list and then pair them with your phone or tablet. Once paired, you should hear a tone in your headphones and see a notification on the app that they’re connected.

You can also use your headphones to listen to music on a Windows. Computer by turning on your headset’s Bluetooth capabilities. If your headphones aren’t already in pairing mode, press and. Hold the power button for about four seconds until the LED indicator starts flashing red and blue and you hear a voice saying that they’re ready to pair with a device.

If you’re using a Mac computer, head to ‘System Preferences’ or the Apple menu and click on ‘Devices’. Make sure Bluetooth is turned on and your earbuds or headphones are in pairing mode; they should appear in the list under ‘Other Devices’. Select them and then follow the on-screen instructions to pair them with your computer. Once paired, you can enjoy your music with full range of sound and hands-free voice control.


The earbuds are powered via a premium protective case that provides up to 16 hours of playback. And charges in ten minutes for two hours of playback. This case also houses a built-in microphone that allows for hands-free calls. This product is compatible with the Tile app, which can be used to locate your earbuds when they are misplaced.

To power on and pair, remove the earbuds from the case and hold both buttons for 4 seconds. This will automatically power on, sync, and enter your earbuds into Pairing Mode. When paired, the left earbud will begin to flash red/blue. On your device, turn on Bluetooth and look for DIME XT 2 in the list of available devices.

While paired, your earbuds will activate Stay-Aware Mode. This feature will amplify ambient sound to improve situational awareness. You can toggle this feature on/off through the Skull Candy App or set it as a button command to control directly from your earbuds.

The built-in media controls allow you to control your music, activate your voice assistant (Siri or Hey Google), and answer/reject calls.


The Mod has an IP55 water-resistant rating, so you can take these earbuds with you in the rain or during your workout without worrying about them getting wet. The earbuds are secure in your ears with the patented Secure FitFin Gels.

3.5mm Jack:

Getting your Skullcandy earbuds to connect with your device is easy and quick once you understand the basic pairing steps. First, make sure your earbuds are charged and ready to pair. Make sure your Bluetooth is turned on and the earbuds are in pairing mode, which is usually done by pressing and holding the power button until the LED lights flash red and blue. Also, be sure to keep your user manual handy for specific instructions on your model.

The next step is to open the Skull Candy app and link to your headphones. You will then be able to enable hands-free voice control, customize your control settings, access your user guide, and get the latest features and firmware updates for your headphones.

Once you have linked to your earbuds, you can enjoy all of your favorite music and audio content on your device. If you want to listen to something in another room, simply switch the source on your device to play it through the 3.5mm jack.

When you are ready to disconnect your earbuds. Just press and hold the power button until the LED indicator lights turn off. You can then power them on again and pair them with a different device. As long as it is within range and has Bluetooth enabled. Some models like the Crusher ANC EVO or Riff Wireless 2 have multipoint support. Which allows them to pair with two devices at once.


In some cases. You may need to connect your Skull Candy headphones with an adapter to use them with a specific device. This will typically be the case if you want to use your headphones with an audio source that doesn’t support Bluetooth (or isn’t compatible with Bluetooth). You can use any USB-C or 3.5mm cable with an adapter to make this connection. Once you’ve made the connection, your headphones should remain paired with any other devices that you’re currently using them with. Any incoming calls or audio playback will automatically pause on the device that’s connected via the adapter.

Getting your earbuds or headphones into Bluetooth pairing mode is relatively straightforward and can be done on all major operating systems, including iOS, Android, Windows, and Mac. The process will vary slightly between these systems, but will generally involve pressing and holding the pairing button until you see a flashing LED indicator light. After the earbuds or headphones are in pairing mode, you can then go to your device’s Settings app and turn on Bluetooth. Once this is enabled, you should be able to find the earbuds or headphones under “OTHER DEVICES” in your list of connected devices.

If you are experiencing issues with your Headphones’ Bluetooth connection, you can contact the Skullcandy Customer Care team for assistance. You can also learn more about troubleshooting your earbuds or headphones by visiting our FAQs page. Keep in mind that regular charging addresses issues promptly. Leveraging features like multipoint pairing can help maintain a healthy set of earbuds or headphones that last for years to come.

Rasheed Alam

Add comment

Your Header Sidebar area is currently empty. Hurry up and add some widgets.